随时随地    智能通行

12年专注,智能构筑人车管理平台

【产品篇】真地翼闸

正确使用刷卡翼闸

翼闸用为进出口人员操控机械设备,在社会环境中运用十分多,翼闸产品被各行各业采用。正确运用进程中,能够减少了工作进程走中的那些噪音及冲击问题。为了延伸翼闸的运用年限,为了能充分发挥翼闸机的功能优势,在运用的进程中,以下的几点你有必要知道且恪守:

翼闸

1翼闸刷卡的方位:

翼闸在运用的时分,持卡人有必要在黄线外进行刷卡。不要站在翼闸红外报警出进行刷卡,在翼闸闸口开到必定的程度,并且有指示箭头提示的时分,方能够进入。最好是不要在其中进行逗留。便于进步进步通道的流畅性。

2翼闸卡片的保护很重要:

持卡人不要将卡折叠,涂改,或将卡和有磁性物品放在一起,避免卡失效,在卡被丢掉必定要及时和管理部门联络进行从头注册,避免信息被泄漏。

3翼闸怎么刷卡

持卡人在感应区刷卡,不要过高,避免感应不到,也不要帖这感应区刷卡,正确是右手持卡,和感应区平行,离感应区20-30mm为最佳,听到有“迪”的声音证明现已刷卡成功。

4翼闸刷卡通行留意:

翼闸在通行的进程中,切不可尾跟着进入翼闸机通道内。不要强行将翼闸板扮开,避免闸板夹伤人,前面人员现已过了中心点,后边人员就能够刷卡了,刷卡有用会有箭头指示同时闸口摆开,这样能够快速经过,翼闸机器有报警或语音提示就不要随意经过。

5翼闸保养:

翼闸机也是需求经常去进行保养的。不要认为它是万能的。定时进行翼闸机箱的内外部尘埃。(参照摆闸翼闸保护和处理方法),保证设备的正常工作.。

6翼闸保护:

翼闸机器有故障立即通知管理部门进行检查,要专业工程师进行保护。或许联络厂家保护。

合理正确的运用翼闸才干最大功能的发挥其成效,以上几点作为翼闸运用客户是有必要知道的常识。如有其他问题欢迎向翼闸厂家真地智能联系。

Correct use of brush gate
Wing gate is used for importers and exporters to control mechanical equipment, in the social environment is used very much, wing gate products are used by all walks of life. The correct use of the process can reduce the noise and impact problems in the process of work. In order to extend the service life of the wing gate and to give full play to its functional advantages, the following points are necessary for you to know and abide by in the course of operation:
1 the location of the credit card:
When the wing gate is in use, it is necessary for cardholders to carry out credit cards outside the yellow line. Do not stand in the gate infrared alarm for swiping cards, in the gate opening to a certain extent, and there is indication of the arrow prompt time, can enter. It's best not to stay in it. Ease of progress and progress.
2 protection of cards is very important.
The cardholder should not fold, alter, or put the cards and magnetic objects together to avoid card failure. If the cards are lost, they must contact the management department to register from scratch in time to avoid information leakage.
3 how to swipe card
The cardholder should not swipe the card in the induction area too high, avoid being unable to sense, or stick the card in the induction area. The right hand-held card is correct, parallel to the induction area. It is best to be 20-30mm away from the induction area. The sound of "Di" proves that the card has been swiped successfully.
4 credit card access:
The wing gate must not be allowed to enter the wing gate during the passage.  Do not force the wing gate to open, to avoid the gate clip injury, the front of the personnel has now passed the center point, the back of the staff can swipe the card, swipe the card with an arrow pointer at the same time swing the gate, so that it can pass quickly, the machine has alarm or voice prompts do not want to go through.
5 wing brake maintenance:
Wing gate machine is also often required for maintenance. Don't think it is omnipotent. The inside and outside dust of the chassis is regularly carried out. (refer to the protection and handling method of the gate brake) to ensure the normal operation of the equipment.
6 wing brake protection:
If the machine fails, it will immediately notify the management department to carry out the inspection and protect the professional engineer. Maybe contact factory protection.
It is necessary to know the above points as the common knowledge of the customers who use the wing brakes. If there are other problems, welcome to the wing gate manufacturers really intelligent connection.

Reading the original text

相关新闻Relevant news